Command Syntax
TLS 216 Programmer Manual 2–7
Commands can specify which measurement to set or query as a mnemonic in the
header. Up to four automated measurements may be displayed with each
displayed waveform. The displayed measurements are specified in this way:
Symbol Meaning
A measurement specifier; is either [top], , , or [bottom].
Commands can specify the channel to use as a mnemonic in the header.
Symbol Meaning
A channel specifier; is either , , , or .
A channel specifier; is one of 1 through 16.
Commands can specify the group to use as a mnemonic in the header.
Symbol Meaning
A group specifier; is one of 1 through 8.
Commands can specify the reference waveform to use as a mnemonic in the
header.
Symbol Meaning
A reference waveform specifier; is either , , , or .
In some commands, you can specify a waveform regardless of whether it is part
of a group or not (for instance, when specifying a trigger source). Specify such a
waveform as follows:
Symbol Meaning
Can be
Measurement Specifier
Mnemonics
Channel Mnemonics
Group Mnemonics
Reference Waveform
Mnemonics
Waveform Mnemonics