Command Descriptions
2–164 TLS 216 Programmer Manual
" # "
!
$
%
&
& $
$ specifies that channel <x> be used as the waveform for the clock source.
% specifies that the channel currently selected in group <y> be used as
the waveform for the clock source. The command $, described
on page 2–133, sets the selected channel.
& specifies that the currently selected channel in reference group <z> be
used as the waveform for the clock source. The command $,
described on page 2–212, sets the selected channel.
&$ specifies that channel <x> in reference group <z> to be used as the
waveform for the clock source.
might return , indicating the first channel of the first reference group
is the clock source.
MEASUrement:IMMed:DELay? (Query Only)Returns the Delay measurement parameters for the immediate measurement.
(The immediate measurement is taken without displaying the results on screen.)
The delay parameters only affect delay type immediate measurements.
Measurement
" #���%
Arguments
Examples
Group
Syntax