Command Descriptions
2–148 TLS 216 Programmer Manual
HORIZONTAL:DELAY:TIME:RUNSAFTER?
might return 6.0E-6, which indicates the delay time is set to 6.0 mS.
HORizontal:DELay:TIMe:TRIGAfterSets the delay time following a trigger before a delayed trigger is accepted. This
command is equivalent to setting Delay by Time time in the Delayed Trigger
menu.
Horizontal
HORizontal:DELay:MODe
HORizontal:DELay:TIMe:TRIGAfter <NR3>
HORizontal:DELay:TIMe:TRIGAfter?
TRIGAfter
?
<Space> <NR3>
:DELay :
HORizontal TIMe :
<NR3> is the time in seconds, between when the logic scope receives a valid
main trigger, and when the delay trigger system enables recognition of a valid
delay trigger event. The range is from 16 ns to 250 seconds with a resolution of
2 ns.
HORIZONTAL:DELAY:TIME:TRIGAFTER 2.0E-3
sets the delay time between the main and delayed time base to 2 ms.
HORIZONTAL:DELAY:TIME:TRIGAFTER?
might return 6.0E-6, which indicates the delay time is set to 6.0 ms.
HORizontal:FITtoscreenSets the horizontal waveform compression operation. Using this command is
equivalent to setting Record Length in the Horizontal menu and the side menu’s
Fit to screen menu item. Waveform compress lets you fit a captured waveform to
the visible screen. It provides the same functionality as if you were in zoom
mode and altered the time/division until the waveform fit the screen.
Group
Related Commands
Syntax
Arguments