Command Descriptions
2–290 TLS 216 Programmer Manual
TRIGGER:MAIN:PULSE:GLITCH:POLARITY?
might return NEGATIVE, specifying that the polarity of the narrower glitch
portion of the waveform is negative.
TRIGger:MAIn:PULse:GLItch:WHEN
Sets or queries the main trigger pulse glitch filter. Glitches are either filtered out
or accepted using a greater-than or less-than format.
Trigger
TRIGger:MAIn:PULse:GLItch:WHEn { MOREThan | LESSThan | TIMEOut }
TRIGger:MAIn:PULse:GLItch:WHEn?
TRIGger :MAIn PULse :
:GLItch
WHEn
:
LESSThan
TIMEOut
<Space>
?
MOREThan
MOREThan specifies that triggering occurs when the width of the glitch is more
than the specified time.
LESSThan specifies that triggering occurs when the width of the glitch is less
than the specified time.
TIMEOut specifies that triggering occurs when the glitch does not occur within
the specified time. Triggering occurs at the point the specified time elapses.
TRIGGER:MAIN:PULSE:GLITCH:WHEN TIMEOUT
specifies that triggering occurs when the glitch does not occur within a
specified time.
TRIGGER:MAIN:PULSE:GLITCH:WHEN?
might return LESSTHAN, indicating that triggering occurs when the width of
the glitch is less than the specified time.
TRIGger:MAIn:PULse:GLItch:WIDth
Sets or queries the width for the main pulse glitch trigger. This command is
equivalent to selecting Polarity & Width in the Trigger menu.
Group
Syntax
Arguments
Examples