Command Descriptions
2–68 TLS 216 Programmer Manual
CURSor:HBArs:POSITION<x>
Positions or queries the horizontal bar cursor.
Cursor
CURSor:HBArs:POSITION<x> <NR3>
CURSor:HBArs:POSITION<x>?
CURSor :HBArs : POSITION <x>
?
<Space> <NR3>
<NR3> specifies the cursor position relative to ground, in volts.
CURSOR:HBARS:POSITION1 25.0E-3
positions one of the horizontal cursors at 25.0 mV.
CURSOR:HBARS:POSITION2?
might return -64.0E-3, indicating that one of the horizontal bar cursors is at
–64.0 mV.
CURSor:HBArs:SELect
Selects or queries which horizontal bar cursor is active for front-panel control.
The active cursor will be displayed as a solid horizontal line and can be moved
using the front-panel general purpose knob when the Cursor menu is active. The
unselected cursor will be displayed as a dashed horizontal line. This command is
equivalent to pressing the SELECT button on the front panel when the Cursor
menu is displayed.
Cursor
CURSor:HBArs:SELect { CURSOR1 | CURSOR2 }
CURSor:HBArs:SELect?
Group
Syntax
Arguments
Examples
Group
Syntax