
Command Descriptions
2–180 TLS 216 Programmer Manual
specifies the falling edge.
specifies the rising edge.
specifies the rising edge be used for measurement 3.
returns either or for measurement 1.
MEASUrement:MEAS<x>:DELay:EDGE2Sets or queries the slope of the edge used for the delay “to” waveform when
taking a delay measurement for MEAS<x>. MEAS<x> is one of the four
measurements available (named Measurement 1 through Measurement 4), where
<x> specifies 1 through 4. This command is equivalent to selecting the edges in
the Delay Edges & Direction side menu.
Use the command MEASUrement:MEAS<X>:SOURCE2 to specify the “delay
to” waveform.
Measurement
! " #
specifies the falling edge.
Arguments
Examples
Group
Syntax
Arguments