Command Descriptions
TLS 216 Programmer Manual 2–133
GROUP4:SCALE 100E-03
sets the group 4 gain to 100 mV/div.
GROUP2:SCALE?
might return 1.00E+0, indicating that the current V/div setting of group 2 is
1 V/div.
GROUP<x>:SELect
Sets or queries the selected channel within the group. Sending this command is
equivalent to setting Selected Channel in the Group Definition menu. The logic
scope highlights (makes brighter on screen) the selected channel in a group.
When automated measurements are turned on, the logic scope takes them on the
selected channel of the selected group. The logic scope also uses the selected
channel when performing an Autoset. The selected channel must fall between the
first channel and last channel, inclusively.
Vertical
GROUP<x>:FIRst, GROUP<x>:LAST
GROUP<x>:SELect <NR1>
GROUP<x>:SELect?
SELect
GROUP <x> :
?
<Space> <NR1>
<NR1> specifies the selected channel of the group from 1 to 16 and must be one
of the channels in the specified in the group.
GROUP2:SELECT 5
specifies channel 5 as the selected channel for group 2.
GROUP1:SELECT?
might return channel 3 as the selected channel for group 1.
Examples
Group
Related Commands
Syntax
Arguments
Examples