Command Descriptions
TLS 216 Programmer Manual 2–251
TRIGger:DELay:PULse:WIDth:POLarity?
TRIGger : :PULse
DELay WIDth : POLarity
<Space>
?
:
POSITIVe
NEGAtive
NEGAtive specifies a negative pulse.
POSITIVe specifies a positive pulse.
TRIGGER:DELAY:PULSE:WIDTH:POLARITY POSITIVE
specifies positive pulse width polarity.
TRIGGER:DELAY:PULSE:WIDTH:POLARITY?
might return 2.0E-6, indicating the delayed pulse width is 2 ms.
TRIGger:DELay:PULse:WIDth:WHEn
Sets or queries the delayed pulse width parameters controlling the logic scope
triggers. The parameters define when the trigger event must complete to trigger
the logic scope. This command is equivalent to selecting the condition in the
Pulse Width Trig When side menu.
Trigger
TRIGger:DELay:PULse:WIDth:WHEn { OUTside | WIThin }
TRIGger:DELay:PULse:WIDth:WHEn?
<Space>
?
TRIGger : :
OUTside
WIThin
PULse
DELay WIDth :
WHEn
:
OUTside specifies a trigger when the duration of the pulse is greater than the
high limit or less than the low limit specified. The high and low limits are
Arguments
Examples
Group
Syntax
Arguments