Command Descriptions
TLS 216 Programmer Manual 2–201
NEWpass <QString>
NEWpass <Space> <QString>
<QString> is the new password. The password can include up to 10 characters.
NEWPASS "mypassword"
creates a new password for accessing the user protected data.
*OPC
Generates the operation complete message in the Standard Event Status Register
(SESR) when all pending operations finish. The *OPC? query places the ASCII
character “1” into the output queue when all pending operations are finished. The
*OPC? response is not available to read until all pending operations finish. For a
complete discussion of the use of these registers and the output queue, see page
3–1.
Status and Error
BUSY?, *WAI
*OPC
*OPC?
*OPC
?
The *OPC command allows you to synchronize the operation of the logic scope
with your application program. Synchronization methods are described starting
on page 3–7.
Table 2–24: Commands that Generate an Operation Complete Message
Operation Command
Automatic scope adjustment AUTOSet EXECute
Internal self-calibration *CAL
Syntax
Arguments
Examples
Group
Related Commands
Syntax