Command Descriptions
TLS 216 Programmer Manual 2–275
FALL
RISe
:MAIn
TRIGger EDGE :
<Space>
?
:SLOpe
RISe instructs the logic scope to trigger on the rising transition (positive) edge of
a signal.
FALL instructs the logic scope to trigger on the falling transition (negative) edge
of a signal.
TRIGGER:MAIN:EDGE:SLOPE RISE
sets the main edge trigger to occur on the rising slope.
TRIGGER:MAIN:EDGE:SLOPE?
might return FALL, indicating the logic scope will trigger on the falling edge
a signal.
TRIGger:MAIn:EDGE:SOUrce
Sets or queries the source for the main edge trigger. This command is equivalent
to selecting the main trigger source in the Main Edge Source side menu.
Trigger
TRIGger:MAIn:EDGE:SOUrce { AUXiliary | CH<x> | LINE }
TRIGger:MAIn:EDGE:SOUrce?
LINE
:MAIn
TRIGger EDGE :: SOUrce
<Space>
?
AUXiliary
CH <x>
AUXiliary specifies the rear panel connector labeled AUX TRIGGER INPUT as
the main trigger source.
Arguments
Examples
Group
Syntax
Arguments