
Command Descriptions
2–168 TLS 216 Programmer Manual
!
"
#
$
$ "
" specifies that channel <x> be the waveform source for the immediate
measurement.
# specifies that the channel currently selected in group <y> be the
waveform source for the immediate measurement. The command "(
, described on page 2–133, sets the selected channel.
$ specifies that the currently selected channel in reference group <z> be
the waveform source for the immediate measurement. The command
", described on page 2–212, sets the selected channel.
$" specifies that channel <x> in reference group <z> to be used as the
waveform source for the immediate measurement.
specifies channel 1 as the immediate measurement source.
might return , indicating the first channel of the first reference group
is the clock source.
MEASUrement:IMMed:SOURCE2Specifies the source to measure “to” when taking an Immediate Delay or Phase
measurement.
Measurement
! % " & #��� & $ &
$" '
!
Arguments
Examples
Group
Syntax