Command Descriptions
TLS 216 Programmer Manual 2–43
Acquisition
ACQuire:STATE
ACQuire:NUMACq?
ACQuire :NUMACq ?
<NR1>
ACQUIRE:NUMACQ?
might return 350, indicating that 350 acquisitions took place since an
ACQUIRE:STATE RUN command was executed.
ACQuire:NUMAVg
Sets or queries the number of waveform acquisitions that make up an averaged
waveform. Using this command is equivalent to setting the Average count in the
Acquisition Mode side menu.
Acquisition
ACQuire:MODe
ACQuire:NUMAVg <NR1>
ACQuire:NUMAVg?
NUMAVg
?
<Space> <NR1>
:ACQuire
<NR1> is the number of waveform acquisitions from 2 to 10,000.
ACQUIRE:NUMAVG 10
specifies that an averaged waveform will show the result of combining 10
separately acquired waveforms.
ACQUIRE:NUMAVG?
might return 75, indicating there are 75 acquisitions specified for averaging.
Group
Related Commands
Syntax
Returns
Examples
Group
Related Commands
Syntax
Arguments
Examples