Command Descriptions
TLS 216 Programmer Manual 2–61
CH<x>? (Query Only)
Returns all the vertical parameters for the specified channel. This query is only
made available to maintain compatibility with Tektronix TDS model instru-
ments.
The logic scope only displays channels in user-defined groups. See the query
description GROUP<x>? on page 2–126 of this section to query the vertical
parameters for any group of input channels.
Vertical
CH<x>?
CH <x> ?
CH1?
might return :CH1:SCALE 10.0E-3;POSITION 0.0E+0;
OFFSET 0.0E+0;COUPLING DC;IMPEDANCE 75;BANDWIDTH FULL.
CH<x>:BANdwidth? (Query Only)
Returns the specified channel bandwidth setting. This query is only made
available to maintain compatibility with Tektronix TDS model instruments.
The logic scope only displays channels in user-defined groups. See the command
description GROUP<x>:BANdwidth on page 2–127 of in this section to set
bandwidth for any group of input channels.
Vertical
CH<x>:BANdwidth?
BANdwidth
CH <x> ?
:
FULL for the maximum bandwidth setting.
20 for the 20 MHz bandwidth limit setting.
Group
Syntax
Examples
Group
Syntax
Returns