Command Groups
TLS 216 Programmer Manual 2–19
Hardcopy Commands
Hardcopy commands let you control the format of hard copy output and the
initiation and termination of hard copies.
Table 2–11: Hardcopy Commands
Header Description
% Start or terminate hardcopy
% Select file to send hard copy data to
%" Set hardcopy output format
%#" Set hardcopy orientation
%"" Select palette to use when making hard copy
% Set hardcopy port for output
Horizontal Commands
Horizontal commands control the time bases of the logic scope. You can set the
time per division (or time per point) of both the main and delay time bases. You
can also set the record lengths.
You may substitute SECdiv for SCAle in the horizontal commands. This
provides program compatibility with earlier models of Tektronix oscilloscopes.
Table 2–12: Horizontal Commands
Header Description
&" Return horizontal settings
&"% Return delay time base settings
&"% Set delay time base mode
&"% Set delay time base time/division
&"%$ Same as HORizontal:DELay:SCAle
&"% Set delay time
&"% Return delay time parameters
&"%
"
Set time to wait in Delay-runs-after-main mode
&"%
"
Set time to wait in Delay-runs-after-trigger
mode
&""!  Set up Waveform Compress