Command Descriptions
TLS 216 Programmer Manual 2–203
*PSCSets and queries the power on status flag that controls the automatic handling of
the DESER, SRER, and ESER registers. When *PSC is true, the DESER register
is set to 255 and the SRER and ESER registers are set to 0 at power on. When
*PSC is false, the current values in the DESER, SRER, and ESER registers are
preserved in nonvolatile memory when power is shut off and are restored at
power on. For a complete discussion of the use of these registers, see page 3–1.
Status and Error
DESE, *ESE, FACtory, *RST, *SRE
= 0 sets the power on status clear flag to false and disables the power on
status clear, allowing the logic scope to possibly assert SRQ after power on.
0 sets the power on status clear flag true. Sending *PSC 1 therefore
enables the power on status clear and prevents any SRQ assertion after power on.
Using an out-of-range value causes an execution warning.
sets the power on status clear flag to false.
might return the value 1, showing that the power on status clear flag is set to
true.
*PUDSets or queries a string of user data protected by the PASSWord command. This
data can only be modified by first entering the correct password. The password is
not necessary to query the data.
Miscellaneous
Group
Related Commands
Syntax
Arguments
Examples
Group