
Command Descriptions
TLS 216 Programmer Manual 2–165
%!"' )
might return
.
MEASUrement:IMMed:DELay:DIREctionSets or queries the starting point and direction of the “delay to” edge when
taking a delay immediate measurement. (The immediate measurement is taken
without displaying the results on screen.)
Use the MEASUrement:IMMed:SOURCE2 command to specify the delay “to”
waveform. The delay direction parameter only affects immediate measurements
of delay.
Measurement
%!"')'#" * (%& + %& ,
%!"')'#"
%!"' ) '#"
$
(%&
%&
(%& starts the search at the end of the waveform and looks for the last
rising or falling edge in the waveform. The slope of the edge is specified by
MEASUrement:IMMed:DELay:EDGE2.
%& starts the search at the beginning of the waveform and looks for the
first rising or falling edge in the waveform. The slope of the edge is specified by
MEASUrement:IMMed:DELay:EDGE2.
starts searching from the beginning of the waveform record.
returns either (%& or .
Examples
Group
Syntax
Arguments
Examples