Command Groups

2–16 TLS 216 Programmer Manual

Cursor Commands

Cursor commands provide control over cursor (caliper) display and readout.

Table 2–8: Cursor Commands

Header Description
CURSor? Return cursor settings
CURSor:FUNCtion Cursors on or off; select cursor type
CURSor:HBArs? Return H bar settings
CURSor:HBArs:DELTa? Return distance between H bars
CURSor:HBArs:POSITION<x> Position a horizontal cursor
CURSor:HBArs:SELect Set which cursor the knob controls
CURSor:HBArs:UNIts Set H bar units
CURSor:MODe Set cursor tracking mode
CURSor:PAIred Position paired cursors; return paired cursor
settings
CURSor:PAIred:HDELTA? Return horizontal distance between 1st and
2nd paired cursors.
CURSor:PAIred:HPOS1? Return horizontal position of 1st paired cursor
CURSor:PAIred:HPOS2? Return horizontal position of 2nd paired cursor
CURSor:PAIred:POSITION1? Return vbar position of the1st paired cursor
CURSor:PAIred:POSITION2? Return vbar position of the 2nd paired cursor
CURSor:PAIred:SELect? Select active paired cursor
CURSor:PAIred:UNITS? Return base units only
CURSor:PAIred:VDELTA? Return vertical distance between 1st and 2nd
paired cursors
CURSor:VBArs Position vertical bar cursors
Cursor:VBArs:BINARY<x>? Return a 16 character string indicating logic
levels at the cursor position
CURSor:VBArs:DELTa? Return horizontal distance between cursors
CURSor:VBArs:POSITION<x> Position a vertical cursor
CURSor:VBArs:SELect Set which cursor the knob controls
CURSor:VBArs:UNits Set vertical cursors to period or frequency