Toshiba GA-1040 manual Windows 95/98/Me

Windows 95/98/Me

REQUIREMENTS:

•The NetWare server is configured correctly and running on your network.

•The TCP/IP protocol is installed and configured correctly on your Windows computer. (Required only when using the NetWare server 5.x in the TCP/IP network.)

•The Client for NetWare Networks and the IPX/SPX-compatible protocol are installed on your Windows computer. (Required only when using the NetWere server in the IPX/SPX network.)

•The Service for NetWare Directory Services is installed. (Required only when using the NetWare server in NDS or NDPS mode.

•You have an apropriate privilege to access to the NetWare server.

The procedure here describes an installation on Windows 98. The procedures are same when Windows 95 or Windows Me is used.

98

1 Open the NetWare server (when using in bindery mode) or NDS directory tree (when using in NDS or NDPS mode) in the Network Neighborhood with the Windows Explorer, and double-click on a queue.

•Select a queue depending on how you operate the printing.

[given name]_direct - print jobs are sent straight to the printer without spooling.

[given name]_hold - print jobs are held until users operate copying or moving them to the Print queue with the job management tools.

[given name]_print - print jobs are spooled to the hard disk in the GA-1040 printer and print out. Use this queue for a general printing.

•When using the NetWere 5.x in NDPS mode and the printer drivers for each Operating System are installed to a NDPS broker, the printer driver is automatically installed.

•Unless using the NetWare 5.x in NDPS mode and printer drivers for each Operating System are installed to a NDPS broker, the Add Printer Wizard screen appears. Continue to the next step.