Toshiba GA-1040 manual Press Enable for Enable Auto IP and press SET

11

12

13

Press [ENABLE] for “Enable Auto IP” and press [SET].

•When you select [RARP] as the protocol, you cannot select [ENABLE] for “Enable Auto IP”. In this case, enter the gateway address using the numeric keys.

Press [UTILITY] and press [FUNCTION].

Press [RESET].

NOTE:

Please reset the printer by turning off the power and then on when you change the settings at the first time since unpacking the GA-1040 printer kit. You can use the [RESET] function to reset the printer from the second time.

20