Toshiba GA-1040 manual Click on OK to save settings

•When using the PostScript printer driver on Windows 2000 or Windows XP, select the option under “Installed Options”, and select the installed option from the drop-down list.

114

Pedestal

This sets whether or not the pedestal is installed.

Not installed - Select this when no pedestal is installed.

Pedestal 1 - Select this when the Paper Feed Pedestal (KD-1009) is installed.

Pedestal 2 - Select this when the Paper Feed Pedestal (KD-1009) and the Cassette Module Device (MY-1017) are installed.

Large Capacity Feeder - Select this when the Large Capacity Feeder (KD-1010) is installed. Finisher

This sets whether or not the finisher is installed.

Not Installed - Select this when no finisher is installed.

Hanging Finisher - Select this when the Hanging Finisher (MJ-1011) is installed. Finisher - Select this when the Finisher (MJ-1012) is installed.

Saddle Stitch Finisher - Select this when the Saddle Stitch Finisher (MJ-1013) is installed. Punch Unit

This sets whether or not the hole punch unit is installed. This can be selected when “Hanging Finisher”, “Finisher” or “Saddle Stitch Finisher” is selected at “Finisher”.

Not Installed - Select this when no hole punch unit is installed.

2 Hole Punch Unit - Select this when the 2 Hole Punch Unit (MJ-6001E) is installed. 2/3 Hole Punch Unit - Select this when the 2/3 Hole Punch Unit (MJ-6001N) is installed.

4 Hole Punch Unit (F) - Select this when the 4 Hole Punch Unit (F) (MJ-6001F) is installed.

4 Hole Punch Unit (S) - Select this when the 4 Hole Punch Unit (S) (MJ-6001S) is installed.

3 Click on [OK] to save settings.