9100 Queue

Select a print queue to be used as a 9100 port for the LPR printing. This option is applied only when “Enable Port 9100” is checked on.

Direct - print jobs are sent straight to the printer without spooling.

Hold - print jobs are held until users operate copying or moving them to the Print queue with the job management tools.

Print - print jobs are spooled to the hard disk in the GA-1040 printer and print out. Use this queue for a general printing.

: The Hold queue and Print queue are only available when the HDD option, PS3 & HDD Upgrade (GE-1030), is installed.

4 “Reset the Printer to Enable Setting” message is displayed on the page after clicking on [SETUP].

5

6

Click on the [Other] menu and click on the [Reset] tab.

The Printer Reset page is displayed.

Click on [Printer Reset].

The confirmation screen appears.

58

Page 60
Image 60
Toshiba GA-1040 manual Click on Printer Reset