Setting up from TopAccess
1 Start the TopAccess and log in to the Administrator’s page.
P28 “STARTING TOPACCESS”
2 Click on the [Network SETUP] menu and click on the [IPX/SPX] tab.
•The IPX/SPX SETUP page is displayed.
SUPPLEMENT:
It is required to set the IPX/SPX only when you want to change the frame types to be used. The printer is configured to select an appropriate frame type automatically. If you do not need to change the setting, go to Step 5.
Auto
Check this to use a frame type that the printer find first. This is checked as a factory default. Ethernet_802.3, Ethernet_802.2, Ethernet_II, Ethernet_SNAP
Instead of “Auto”, check the frame types to be used. The printer will use all frame types checked here. These can be checked only when “Auto” is checked off.
3 Select the frame type to be used and click on [SETUP].
SETTING UP THE PROTOCOLS
35
