Zebra Technologies Q3DLUBA000002, Q4DLU1B000000 manual Tools and Supplies, Storage and Handling

Tools and Supplies

Make use of the following tools and supplies for maintaining the printer and installing the repair kits:

Hand Tools

•#1 Phillips Head Screw Driver

•3/32” hex driver

Special Tools (optional)

•AU16259-1 Printhead Spring Tool

•AU16266-1 Gap Sensor Assy installation tool

Supplies

•Cleaning Pen (10 pack), p/n AN11209-1

•Cleaning Kit with Cleaning Pen, and Cotton Swabs p/n AT702-1

•Isopropyl alcohol

•SuperLube™ lubricant p/n 82325 SL

•Spares Kit AN16753-029, consisting of:

•Eye Sensor Calibration Swatch p/n AA15417-1

•Gap Sensor Calibration Swatch p/n AA15417-2

•Media, Batteries, and Chargers for QL series printers per table below:

Mobile Printer	Journal Media	Label Media
Model #	(for Life Test)	(for Gap test)
QL 220/220+	LD-D2RP5B	LD-D2YL5R
QL 320/320+	LD-R3RS2J	LD-D3AF7K
QL 420/420+	LD-D4FN6K	LD-D4YL5K

Tag Media

LD-D2TP5W

LD-3TP5H

LD-D4TP5L

		Charger and/or
Label Media	Battery	Conditioner
LD-R5LF5E	AT16004-1	AT17696-1 or AT16305-4*
LD-R3LF7Q	AT16004-1	AT17696-1 or AT16305-4*
LD-R4LFSP	AT16293-1	AT17696-1 or AT16305-4*

* US version only. Consult factory for charger part numbers compatible with other locations.

Storage and Handling

Handling:

The use of an ESD wrist strap at a properly grounded workstation is required when han- dling printed circuit boards or other sensitive electronic components. The ESD strap prevents any electro-static damage to occur while assembling these components. The use of the ESD strap will be noted in the applicable instructions.

Use of the ESD strap will be noted in the instructions by this symbol.

Storage

Replacement kits which are sensitive to ESD damage are supplied in static resistant packaging. Always keep these parts in their original packaging until they are to be in- stalled.

RMAN-QLS-002 rev. A Repair Procedures • 2-42 •