ZyWALL 2 Series User’s Guide
| Table |
|
|
LABEL | DESCRIPTION |
|
|
Incoming | Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a |
| particular service. The ZyWALL forwards the traffic with this port (or range of ports) to the |
| client computer on the LAN that requested the service. |
|
|
Start Port | Type a port number or the starting port number in a range of port numbers. |
|
|
End Port | Type a port number or the ending port number in a range of port numbers. |
|
|
Trigger | The trigger port is a port (or a range of ports) that causes (or triggers) the ZyWALL to |
| record the IP address of the LAN computer that sent the traffic to a server on the WAN. |
|
|
Start Port | Type a port number or the starting port number in a range of port numbers. |
|
|
End Port | Type a port number or the ending port number in a range of port numbers. |
|
|
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
NAT |