ZyWALL 2 Series User’s Guide

 

Table 19-5 Protocol/ Port Report

 

 

LABEL

DESCRIPTION

 

 

Protocol/Port

This column lists the protocols or service ports for which the most traffic has gone

 

through the ZyWALL. The protocols or service ports are listed in descending order

 

with the most used protocol or service port listed first.

 

 

Direction

This field displays Incoming to denote traffic that is coming in from the WAN to the

 

LAN. This field displays Outgoing to denote traffic that is going out from the LAN to

 

the WAN.

 

 

Amount

This column lists how much traffic has been sent and/or received for each protocol or

 

service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies

 

with the amount of traffic for the particular protocol or service port. The count starts

 

over at 0 if a protocol or port passes the bytes count limit (see Table 19-7 Report

 

Specifications).

19.3.3 Viewing LAN IP Address

In the Reports screen, select LAN IP Address from the Report Type drop-down list box to have the ZyWALL record and display the LAN IP addresses that the most traffic has been sent to and/or from and how much traffic has been sent to and/or from those IP addresses.

Computers take turns using dynamically assigned LAN IP addresses. TheZyWALL continues recording the bytes sent to or from a LAN IP address when itis assigned to a different computer.Figure 19-6 LAN IP Address Report Example

19-10

Log Screens