ZyWALL 2 Series User’s Guide

17.12Configuring TELNET

Click REMOTE MGNT to open the TELNET screen.

 

 

Figure 17-19 Telnet

The following table describes the labels in this screen.

 

 

Table 17-3 Telnet

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

Server Port

You may change the server port number for a service if needed, however you must

 

 

use the same port number in order to use that service for remote management.

 

 

 

 

Server Access

Select the interface(s) through which a computer may access the ZyWALL using this

 

 

service.

 

 

 

 

Secure Client IP

A secure client is a “trusted” computer that is allowed to communicate with the

 

Address

ZyWALL using this service.

 

 

Select All to allow any computer to access the ZyWALL using this service.

 

 

Choose Selected to just allow the computer with the IP address that you specify to

 

 

access the ZyWALL using this service.

 

 

 

 

Apply

Click Apply to save your customized settings and exit this screen.

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

17-20

Remote Management Screens