ZyWALL 2 Series User’s Guide

 

Table 32-1 System Maintenance: Status Menu Fields

 

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

 

 

Status

Shows the port speed and duplex setting if you’re using Ethernet

 

 

 

Encapsulation and Down (line is down), idle (line (ppp) idle), dial (starting to

 

 

 

trigger a call) and drop (dropping a call) if you’re using PPPoE Encapsulation.

 

 

TxPkts

This is the number of transmitted packets on this port.

 

 

 

 

 

 

RxPkts

This is the number of received packets on this port.

 

 

 

 

 

 

Cols

This is the number of collisions on this port.

 

 

 

 

 

 

Tx B/s

This shows the transmission speed in Bytes per second on this port.

 

 

 

 

 

 

Rx B/s

This shows the reception speed in Bytes per second on this port.

 

 

 

 

 

 

Up Time

This is the total amount of time the line has been up.

 

 

 

 

 

 

Ethernet Address

This is the Ethernet address of the port listed on the left.

 

 

 

 

 

 

IP Address

This is the IP address of the port listed on the left.

 

 

 

 

 

 

IP Mask

This is the IP mask of the port listed on the left.

 

 

 

 

 

 

DHCP

This is the DHCP setting of the port listed on the left.

 

 

 

 

 

 

System up Time

This is the total time the ZyWALL has been on.

 

 

 

 

 

 

Name

This is the ZyWALL’s system name + domain name assigned in menu 1. For

 

 

 

example, System Name= xxx; Domain Name= baboo.mickey.com

 

 

 

Name= xxx.baboo.mickey.com

 

 

 

 

 

 

Routing

Refers to the routing protocol used.

 

 

 

 

 

 

ZyNOS F/W Version

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware

 

 

 

version. ZyNOS is a registered trademark of ZyXEL Communications

 

 

 

Corporation.

 

 

You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24.

 

 

 

 

 

32.3 System Information and Console Port Speed

This section describes your system and allows you to choose different console port speeds. To get to the System Information and Console Port Speed:

Step 1. Enter 24 to go to Menu 24 – System Maintenance.

System Information and Diagnosis

32-3