ZyWALL 2 Series User’s Guide
| Menu 11.4 - Remote Node Script |
Active= No |
|
Set 1: | Set 5: |
Expect= | Expect= |
Send= | Send= |
Set 2: | Set 6: |
Expect= | Expect= |
Send= | Send= |
Set 3: |
|
Expect= |
|
Send= |
|
Set 4: |
|
Expect= |
|
Send= |
|
| Enter here to CONFIRM or ESC to CANCEL: |
|
|
The following table describes the fields in this menu.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
Active | Press [SPACE BAR] and then [ENTER] to select either Yes to enable the | No |
| AT strings or No to disable them. | (default) |
Set | Enter an Expect string to match. After matching the Expect string, the |
|
Expect | ZyWALL returns the string in the Send field. |
|
Set | Enter a string to send out after the Expect string is matched. | 0.0.0.0 |
Send |
|
|
23.9 Remote Node Filter
Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to set the value to Yes. Press [ENTER] to open Menu 11.5 - Remote Node Filter.
Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the ZyWALL to prevent certain packets from triggering calls. You can specify up to four filter sets separated by commas, for example, 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this field. Please refer to the Filters chapter for more information on defining the filters.
WAN and Dial Backup Setup |