ZyXEL Communications ZyWALL 2 Series 20.5.3 Back to Factory Defaults, Reset, Return, Configuration, Figure 20-13Reset Warning Message, Figure 20-12Configuration Upload Error

ZyWALL 2 Series User’s Guide

If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default device IP address (192.168.1.1). See your Quick Start Guide for details on how to set up your computer’s IP address.

If the upload was not successful, the following screen will appear. Click Return to go back to the Configuration screen.

Figure 20-12 Configuration Upload Error

20.5.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and returns the ZyWALL to its factory defaults as shown on the screen. The following warning screen will appear.

Figure 20-13 Reset Warning Message

20-10 Maintenance