ZyWALL 2 Series User’s Guide

 

Figure 6-1 WAN Setup: Route

The following table describes the fields in this screen.

 

Table 6-3 WAN Setup: Route

 

 

LABEL

DESCRIPTION

 

 

WAN

The default WAN connection is "1” as your broadband connection via the WAN port

 

should always be your preferred method of accessing the WAN. The default priority of

Traffic

the routes is WAN, Traffic Redirect and then Dial Backup:

Redirect

You have two choices for an auxiliary connection (Traffic Redirect and Dial Backup) in

Dial Backup

the event that your regular WAN connection goes down. If Dial Backup is preferred to

Traffic Redirect, then type "14" in the Dial Backup Priority (metric) field (and leave the

 

Traffic Redirect Priority (metric) at the default of "15").

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

6.5Configuring WAN ISP

To change your ZyWALL’s WAN ISP settings, click WAN, then the WAN ISP tab. The screen differs by the

encapsulation.

6.5.1 Ethernet Encapsulation

The screen shown next is for Ethernet encapsulation.

WAN Screens

6-3