ZyXEL Communications ZyWALL 2 Series 20.3 DHCP Table Screen, None, Host Name, DHCP Table, IP Address, MAINTENANCE, MAC Address, Table 20-3DHCP Table, Figure 20-3DHCP Table

ZyWALL 2 Series User’s Guide

	Table 20-2 System Status: Show Statistics
LABEL	DESCRIPTION
Stop	Click Stop to stop refreshing statistics, click Stop.

20.3 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyWALL as a DHCP server or disable it. When configured as a server, the ZyWALL provides the TCP/IP configuration for the clients. If set to None, DHCP service will be disabled and you must have another DHCP server on your LAN, or else the computer must be manually configured.

Click MAINTENANCE, and then the DHCP Table tab. Read-only information here relates to your DHCP status. The DHCP table shows current DHCP client information (including IP Address, Host Name and MAC Address) of all network clients using the DHCP server.

	Figure 20-3 DHCP Table
The following table describes the labels in this screen.
	Table 20-3 DHCP Table
LABEL	DESCRIPTION
#	This is the index number of the host computer.

20-4 Maintenance