ZyWALL 2 Series User’s Guide
23.7 Editing TCP/IP Options
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.3 - Remote Node Network Layer Options.
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= SUA Only
Metric= 15
Private= No
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
FigureThe following table describes the fields in this menu.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
Rem IP | Leave this field set to 0.0.0.0 to have the ISP or other remote router | 0.0.0.0 |
Address | dynamically (automatically) send its IP address if you do not know it. Enter | (default) |
| the remote gateway’s IP address here if you know it (static). |
|
|
|
|
Rem Subnet | Leave this field set to 0.0.0.0 to have the ISP or other remote router | 0.0.0.0 |
Mask | dynamically send its subnet mask if you do not know it. Enter the remote | (default) |
| gateway’s subnet mask here if you know it (static). |
|
|
|
|
My WAN | Leave the field set to 0.0.0.0 to have the ISP or other remote router | 0.0.0.0 |
Addr | dynamically (automatically) assign your WAN IP address if you do not | (default) |
| know it. Enter your WAN IP address here if you know it (static). |
|
| This is the address assigned to your local ZyWALL, not the remote router. |
|
|
|
|
WAN and Dial Backup Setup |