ZyWALL 2 Series User’s Guide

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= PPPoE

Service Type= N/A

My Login=

My Password= ********

Retype to Confirm= ********

Idle Timeout= 100

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel:

Figure 25-3 Internet Access Setup (PPPoE)

The following table contains instructions about the new fields when you choose PPPoE in the Encapsulation field in menu 4.

Table 25-3 New Fields in Menu 4 (PPPoE) screen

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Encapsulation

Press [SPACE BAR] and then press [ENTER] to choose PPPoE. The

PPPoE

 

encapsulation method influences your choices in the IP Address field.

 

Idle Timeout

This value specifies the time in seconds that elapses before the ZyWALL

100

 

automatically disconnects from the PPPoE server.

(default)

 

 

 

If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu 11 and enter the PPPoE service name provided to you in the Service Name field.

25.5 Basic Setup Complete

Well done! You have successfully connected, installed and set up your ZyWALL to operate on your network as well as access the Internet.

When the firewall is activated, the default policy allows all communications to the

Internet that originate from the LAN, and blocks all traffic to the LAN thatoriginates from the Internet.

You may deactivate the firewall in menu 21.2 or via the ZyWALL embedded web configurator. You may also define additional firewall rules or modify existing ones but please exercise extreme caution in doing so. See the firewall chapters for more information on the firewall.

Internet Access

25-5