ZyWALL 2 Series User’s Guide

Chapter 25

Internet Access

This chapter shows you how to configure your ZyWALL for Internet access.

25.1 Introduction to Internet Access Setup

Use information from your ISP along with the instructions in this chapter to set up your ZyWALL to access the Internet. There are three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE Encapsulation. Contact your ISP to determine what encapsulation type you should use.

25.2 Ethernet Encapsulation

If you choose Ethernet in menu 4 you will see the next screen.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

Retype to Confirm= N/A

Login Server= N/A

Relogin Every (min)= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel:

Figure 25-1 Menu 4: Internet Access Setup (Ethernet)

The following table describes this screen.

 

Table 25-1 Menu 4: Internet Access Setup (Ethernet)

 

 

FIELD

DESCRIPTION

 

 

ISP’s Name

Enter the name of your Internet Service Provider, e.g., myISP. This information is

 

for identification purposes only.

 

 

Internet Access

25-1