ZyWALL 2 Series User’s Guide

Table 28-3 Fields in Menu 15.1.1

FIELD

DESCRIPTION

EXAMPLE

 

 

 

 

 

Set Name

Enter a name for this set of rules. This is a required field. If this field is left

NAT_SET

 

 

blank, the entire set will be deleted.

 

 

 

 

 

 

 

Action

The default is Edit. Edit means you want to edit a selected rule (see following

Edit

 

 

field). Insert Before means to insert a rule before the rule selected. The rules

 

 

 

 

after the selected rule will then be moved down by one rule. Delete means to

 

 

 

 

delete the selected rule and then all the rules after the selected one will be

 

 

 

 

advanced one rule. None disables the Select Rule item.

 

 

Select

When you choose Edit, Insert Before or Delete in the previous field the

1

 

Rule

cursor jumps to this field to allow you to select the rule to apply the action in

 

 

 

 

question.

 

 

 

 

 

 

 

 

 

 

 

 

You must press [ENTER] at the bottom of the screen to save the whole set. You must do this again if you make any changes to the set – including deleting a rule.

No changes to the set take place until this action is taken.

Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global

Start/End IPs.An IP End address must be numerically greater than its corresponding IP Startaddress.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start=

End = N/A

Global IP:

Start=

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 28-7 Menu 15.1.1.1: Editing/Configuring an Individual Rule in a Set

NAT

28-7