ZyWALL 2 Series User’s Guide
TableFIELD | DESCRIPTION | OPTIONS |
|
|
|
Network | When you select this option the SMT will use Address Mapping Set 1 | Full Feature |
Address | (menu 15.1 - see section 28.2.1 for further discussion). You can |
|
Translation | configure any of the mapping types described in the Web Configurator |
|
| User’s Guide. Choose Full Feature if you have multiple public WAN IP |
|
| addresses for your ZyWALL. |
|
| When you select Full Feature you must configure at least one |
|
| address mapping set! |
|
|
|
|
| NAT is disabled when you select this option. | None |
|
|
|
| When you select this option the SMT will use Address Mapping Set | SUA Only |
| 255 (menu 15.1 - see section 28.2.1). Choose SUA Only if you have |
|
| just one public WAN IP address for your ZyWALL. |
|
28.2 NAT Setup
Use the address mapping sets menus and submenus to create the mapping table used to assign global addresses to computers on the LAN. When you select Full Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT will use the
The server set is a list of LAN servers mapped to external ports. To use this set, a server rule must be set up inside the NAT address mapping set. Please see the section on port forwarding in the chapter on NAT web configurator screens for further information on these menus. To configure NAT, enter 15 from the main menu to bring up the following screen.
Menu 15 - NAT Setup
1.Address Mapping Sets
2.Port Forwarding Setup
3.Trigger Port Setup
Enter Menu Selection Number:
FigureNAT |