ZyWALL 2 Series User’s Guide

26.3 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER]

to open Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= SUA Only

Metric= 1

Private=

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Figure 26-4 Menu 11.3: Remote Node Network Layer Options for Ethernet Encapsulation This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP Addr

field for Ethernet encapsulation. The following table describes the fields in this screen.

Table 26-4 Remote Node Network Layer Options Menu Fields

FIELD

DESCRIPTION

EXAMPLE

 

 

 

IP Address

If your ISP did not assign you an explicit IP address, press [SPACE BAR]

Dynamic

Assignment

and then [ENTER] to select Dynamic; otherwise select Static and enter

(default)

 

the IP address & subnet mask in the following fields.

 

 

 

 

(Rem) IP

If you have a Static IP Assignment, enter the IP address assigned to you

 

Address

by your ISP.

 

 

 

 

(Rem) IP

If you have a Static IP Assignment, enter the subnet mask assigned to

 

Subnet Mask

you.

 

 

 

 

Gateway IP

This field is applicable to Ethernet encapsulation only. Enter the gateway

 

Addr

IP address assigned to you if you are using a static IP address.

 

 

 

 

Remote Node Setup

26-7