|
| ZyWALL 2 Series User’s Guide | |
|
| Table | |
|
|
|
|
| LABEL | DESCRIPTION |
|
|
|
|
|
| IP Address | This field displays the IP address relative to the # field listed above. |
|
|
|
|
|
| Host Name | This field displays the computer host name. |
|
|
|
|
|
| MAC Address | This field shows the MAC address of the computer with the name in the Host Name |
|
|
| field. |
|
|
| Every Ethernet device has a unique MAC (Media Access Control) address. The MAC |
|
|
| address is assigned at the factory and consists of six pairs of hexadecimal characters, |
|
|
| for example, 00:A0:C5:00:00:02. |
|
|
|
|
|
| Refresh | Click Refresh to renew the screen. |
|
|
|
|
|
20.4 F/W Upload Screen
Find firmware at www.ZyXEL.com in a file that (usually) uses the system model name with a "*.bin" extension, e.g., "ZyWALL.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File Maintenance chapter for upgrading firmware using FTP/TFTP commands.
Click MAINTENANCE, and then the F/W Upload tab. Follow the instructions in this screen to upload firmware to your ZyWALL.
FigureMaintenance |