ZyWALL 2 Series User’s Guide

The following table describes the labels in this screen.

 

Table 14-9 VPN Manual Setup

 

 

LABEL

DESCRIPTION

 

 

Active

Select this check box to activate this VPN policy.

 

 

Name

Type up to 32 characters to identify this VPN policy. You may use any character,

 

including spaces, but the ZyWALL drops trailing spaces.

Key Management

Select IKE or Manual Key (or Manual) from the drop-down list box. Manual Key is a

 

useful option for troubleshooting if you have problems using IKE key management.

Local:

Local IP addresses must be static and correspond to the remote IPSec router's configured remote IP addresses.

Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have the same local or remote IP address, but not both. You can configure multiple SAs between the same local and remote IP addresses, as long as only one is active at any time.

Client to Site

Select this radio button to build a client to site VPN connection.

 

 

Local IP Address

Enter a static local IP address. The local IP address must correspond to the remote

 

IPSec router's configured remote IP addresses.

 

 

Site to Site

Select this radio button to establish a VPN between two sites (groups of IP

addresses).

 

 

 

Address Type

Use the drop-down list box to choose Range Address or Subnet Address. Select

 

Range Address for a specific range of IP addresses. Select Subnet Address to

 

specify IP addresses on a network by their subnet mask.

Starting IP

When the Address Type field is configured to Range Address, enter the beginning

Address

(static) IP address, in a range of computers on the LAN behind your ZyWALL. When

 

the Address Type field is configured to Subnet Address, this is a (static) IP address

 

on the LAN behind your ZyWALL.

 

 

Ending IP

When the Address Type field is configured to Range Address, enter the end (static)

Address/Subnet

IP address, in a range of computers on the LAN behind your ZyWALL. When the

Mask

Address Type field is configured to Subnet Address, this is a subnet mask on the

 

LAN behind your ZyWALL.

 

 

14-30

VPN Screens