ZyWALL 2 Series User’s Guide

Figure 32-10 WAN & LAN DHCP

The following table describes the diagnostic tests available in menu 24.4 for your ZyWALL and associated connections.

 

Table 32-4 System Maintenance Menu Diagnostic

 

 

 

FIELD

 

DESCRIPTION

 

 

 

Ping Host

 

Enter 1 to ping any machine (with an IP address) on your LAN or WAN.

 

 

Enter its IP address in the Host IP Address field below.

WAN DHCP Release

 

Enter 2 to release your WAN DHCP settings.

 

 

 

WAN DHCP Renewal

 

Enter 3 to renew your WAN DHCP settings.

 

 

 

Internet Setup Test

 

Enter 4 to test the Internet setup. You can also test the Internet setup in

 

 

Menu 4 - Internet Access. Please refer to the Internet Access chapter for

 

 

more details. This feature is only available for dial-up connections using

 

 

PPPoE or PPTP encapsulation.

 

 

 

Reboot System

 

Enter 11 to reboot the ZyWALL.

 

 

 

Host IP Address=

 

If you entered 1 in Ping Host, then enter the IP address of the computer

 

 

you want to ping in this field.

Enter the number of the selection you would like to perform or press [ESC] to cancel.

System Information and Diagnosis

32-11