ZyXEL Communications ZyWALL 2 Series Table 19-2Log Settings

ZyWALL 2 Series User’s Guide

The following table describes the labels in this screen.

		Table 19-2 Log Settings
LABEL		DESCRIPTION
Address Info
Mail Server	Enter the server name or the IP address of the mail server for the e-mail
	addresses specified below. If this field is left blank, logs and alert messages will
	not be sent via e-mail.
Mail Subject	Type a title that you want to be in the subject line of the log e-mail message that
	the ZyWALL sends.
Send Log To	Logs are sent to the e-mail address specified in this field. If this field is left blank,
	logs will not be sent via e-mail.
Send Alerts To	Alerts are sent to the e-mail address specified in this field. If this field is left blank,
	alerts will not be sent via e-mail.
Syslog Logging	Syslog logging sends a log to an external syslog server used to store logs.
Active	Click Active to enable syslog logging.
Syslog Server IP	Enter the server name or IP address of the syslog server that will log the selected
Address	categories of logs.
Log Facility	Select a location from the drop down list box. The log facility allows you to log the
	messages to different files in the syslog server. Refer to the documentation of
	your syslog program for more details.
Send Log
Log Schedule	This drop-down menu is used to configure the frequency of log messages being
	sent as E-mail:
	•	Daily
	•	Weekly
	•	Hourly
	• When Log is Full
	•	None.
	If you select Weekly or Daily, specify a time of day when the E-mail should be
	sent. If you select Weekly, then also specify which day of the week the E-mail
	should be sent. If you select When Log is Full, an alert is sent when the log fills
	up. If you select None, no log messages are sent
Day for Sending Log	Use the drop down list box to select which day of the week to send the logs.

Log Screens 19-5