ZyXEL Communications ZyWALL 2 Series 28.5.2 Two Points To Remember About Trigger Ports, Menu 15.3 — Trigger Port Setup, Figure 28-23Menu 15.3: Trigger Port Setup

ZyWALL 2 Series User’s Guide

5.Only A can connect to the Real Audio server until the connection is closed or times out. The ZyWALL times out in three minutes with UDP (User Datagram Protocol) or two hours with TCP/IP (Transfer Control Protocol/Internet Protocol).

28.5.2 Two Points To Remember About Trigger Ports

1.Trigger events only happen on data that is going coming from inside the ZyWALL and going to the outside.

2.If an application needs a continuous data stream, that port (range) will be tied up so that another computer on the LAN can’t trigger it.

Only one LAN computer can use a trigger port (range) at a time.

Enter 3 in menu 15 to display Menu 15.3 — Trigger Port Setup, shown next.

		Menu 15.3	- Trigger Port Setup
Rule	Name		Incoming	Trigger
		Start Port End Port		Start Port End Port

----------------------------------------------------------------------

1.	Real Audio	6970	7170	7070	7070
2.		0	0	0	0
3.		0	0	0	0
4.		0	0	0	0
5.		0	0	0	0
6.		0	0	0	0
7.		0	0	0	0
8.		0	0	0	0
9.		0	0	0	0
10.		0	0	0	0
11.		0	0	0	0
12.		0	0	0	0

Press ENTER to Confirm or ESC to Cancel:

Figure 28-23 Menu 15.3: Trigger Port Setup

The following table describes the fields in this screen.

28-18 NAT