ZyWALL 2 User’s Guide
| Menu 24.11 - Remote | Management Control |
TELNET Server: | Port = 23 | Access = ALL |
FTP Server: | Secure Client IP | = 0.0.0.0 |
Port = 21 | Access = ALL | |
SSH Server: | Secure Client IP = 0.0.0.0 | |
Certificate = auto_generated_self_signed_cert | ||
| Port = 0 | Access = ALL |
HTTPS Server: | Secure Client IP = 0.0.0.0 | |
Certificate = auto_generated_self_signed_cert | ||
| Authenticate Client Certificates = No | |
| Port = 443 | Access = ALL |
HTTP Server: | Secure Client IP = 0.0.0.0 | |
Port = 80 | Access = ALL | |
SNMP Service: | Secure Client IP = 0.0.0.0 | |
Port = 161 | Access = ALL | |
DNS Service: | Secure Client IP = 0.0.0.0 | |
Port = 53 | Access = ALL | |
| Secure Client IP = 0.0.0.0 | |
| Press ENTER to Confirm or ESC to Cancel: | |
|
|
|
The following table describes the fields in this screen.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
Telnet Server | Each of these |
|
FTP Server | remotely manage the ZyWALL. |
|
SSH Server |
|
|
HTTPS Server |
|
|
HTTP Server |
|
|
SNMP Service |
|
|
DNS Service |
|
|
|
|
|
Port | This field shows the port number for the remote management service. | 23 |
| You may change the port number for a service if needed, but you must |
|
| use the same port number to use that service for remote management. |
|
Access | Select the access interface (if any) by pressing [SPACE BAR], then | LAN Only |
| [ENTER] to choose from: LAN only, WAN only, ALL or Disable. | (default) |
Secure Client | The default 0.0.0.0 allows any client to use this service to remotely | 0.0.0.0 |
IP | manage the ZyWALL. Enter an IP address to restrict access to a client |
|
| with a matching IP address. |
|
Certificate | Select the certificate that the ZyWALL will use to identify itself. |
|
|
|
|
Remote Management |