ZyWALL 2 Series User’s Guide

2.3.2 Uploading a Configuration File Via Console Port

Step 3. Download the default configuration file from the ZyXEL Networks FTP site, unzip it and save it in a folder.

Step 4. Turn off the ZyWALL, begin a terminal emulation software session and turn on the ZyWALL again. When you see the message "Press Any key to enter Debug Mode within 3 seconds", press any key to enter debug mode.

Step 5. Enter "y" at the prompt below to go into debug mode. Step 6. Enter "atlc" after "Enter Debug Mode" message.

Step 7. Wait for "Starting XMODEM upload" message before activating Xmodem upload on your terminal. This is an example Xmodem configuration upload using HyperTerminal.

Step 8. Click Transfer, then Send File to display the following screen.

Type the configuration file’s location, or click Browse to search for it.

Choose the Xmodem protocol.

Then click Send.

Figure 2-3 Example Xmodem Upload

Step 9. After successful firmware upload, enter "atgo" to restart the router.

2.4Navigating the ZyWALL Web Configurator

We use the ZyWALL 2 Web screens in this guide as an example. Screens vary slightly for different ZyWALL models. The following summarizes how to navigate the web configurator from the MAIN MENU screen.

Introducing the Web Configurator

2-3