Oki 4100 manual Dial Parameter Settings

Page 51

4100 Fax ENGLISH 15/1/97 9:37 am Page 51

Dial Parameter Settings

These functions allow you to control the way your fax machine dials telephone numbers. Refer to Dial Parameter Settings List to determine which settings you may need to change, then refer to Changing Your Dial Parameter Settings to make the change.

Tip: Some settings are not available in some countries. If you have trouble accessing a dial parameter setting listed here, contact your dealer for assistance.

Dial Parameter Settings List

REDIAL TRIES: This function controls how many times your fax machine will automatically redial a number which is busy or which does not answer. Available settings are from 0 to 10 tries.

REDIAL INTERVAL: The function controls how long your fax machine waits between each automatic redi- al attempt. Available settings are from 1 to 6 minutes.

DIAL TONE DETECT: This function allows your fax machine to wait for and detect a dial tone before pro- ceeding with dialling. Available settings are on and off.

BUSY TONE DETECT: This function allows your fax machine to detect a busy tone when sending a fax. Available settings are on and off.

MF(TONE)/DP(PULSE): This function controls

 

what method your fax machine uses for dialling.

English

number (like a rotary telephone). MF, or multi-fre-

Two dialling methods are in common use. DP, or

 

dial pulse dialling, uses monotone pulses to dial a

 

quency dialling (touch tone), uses different tones

 

 

to dial a number. Available settings are MF and DP.

 

PULSE DIAL RATE: If your fax machine is set to

 

pulse dialling, this function controls how quickly

 

your fax machine sends our dialling pulses (the dial

 

pulse rate varies in different countries). Available

 

settings are 10 pps, 16 pps and 20 pps.

 

PULSE MAKE RATIO: Available settings are 33%

 

and 39%.

 

PULSE DIAL TYPE: If your fax machine is set to

 

pulse dialling, this function controls the type of

 

pulse dialling used (different types of pulse dialling

 

are used in different countries). Available settings

 

are N, 10-N and N+1.

 

MF(TONE) DURATION: If your fax machine is set

 

to tone dialling, this function controls the duration

 

of the tones used for dialling (the tone duration

 

varies in different countries). Available settings are

 

75 ms, 85 ms, and 100 ms.

 

Programming 51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Handbook EnglishEnglish Safety Installation HintsOperation and Maintenance Emergency First Aid Toner Cartridge Image Drum Unit HandlingContents Basic Operations Advanced OperationsProgramming Problem Solving Specifications IndexReports Introduction FeaturesProduct Options What You Should Receive Component IdentificationPaper Tray/Copy Stacker ComponentsExpansion Control Panel Control Panel Keys and Indicators English English One Touch Keypad Signal Tones Machine’s function settingsInstallation Getting StartedUnpacking Setting Up Your Fax Machine Release the toner Connect to the Telephone Line Loading Paper English Setting the ClockSetting the Answering Mode Setting the Fax Identification To Do This Use Setting LanguageConnecting to a PBX Programming One Touch Keys Dial DirectoriesOne Touch Parameters Programming Auto Dial Numbers Location Programming Programming GroupsPreparing Documents Basic OperationsDifferent sizes at the same time Loading DocumentsDocument Type Contrast to Use Sending a Fax to a Single LocationReceiving Faxes Manually MSG. in MEMORY, Printing Receiving Faxes in MemoryRejecting Unsolicited Fax Messages Power Failures and MemoryMaking Copies Using Voice RequestLift the handset and press the Voice Request key Advanced Operations Sending a Fax at a Later Date and TimePRG. Start Time Sending a Delayed Fax From Memory Sending a Fax to Multiple Locations Relay Broadcasting Sending a Confidential FaxRemote List no Polling Select LocationCustomizing Features and Operations User Function SettingsProgramming English Power Save MODE, Pressstart to Exit ECM Function The error correction mode Dial Parameter Settings Service Function Settings Service Function Settings List English Understanding Reports ReportsDistant Station ID Codes Used in Reports Printing ReportsCommunication Codes Clearing a Document Jam Problem SolvingClearing a Printing Paper Jam Close the fax machine’s top cover Paper is damaged, remove and replace it Replacing the Toner CartridgeEnglish English Replacing the Image Drum Unit Remove the old image drum unit with its toner Reading Your Print Counters Problem ChecklistEnglish English English Category Specifications SpecificationsStatutory User Information UK only TEL/FAX Change Over Busy Auto StartCover CanclERR Report MCF Drum CountEcho Protection ECM FunctionMftone Duration 52 MFTONE/DPPULSE 52 MH only Long DOC. TXPunit PC/FAX SwitchPulse Dial Rate Pulse Make RatioTEL/FAX SW Timer ProgRing Response StopTX Mode Default
Top Page Image Contents