Bosch Appliances WFMC8400UC During Washing, Add Garment, Interrupting Program, Changing a program

If a program is interrupted at a hig

temperature, leave the laundry to cool down until the glass is cool to touch.

Turn the program selectorOffto.

Turn the program selectorDrainto

or Spin. (Does not apply to 500 Plus Series).

i

Start/Pause indicator light is lit (red). Laundry can be added in •Pause" mode when the drum is at a standstill.

Canceling an active program

If you would like to terminate a program and remove the laundry:

If the spin speed is too high, the

i

When theStart/Pause indicator

light is lit (red), the program can b interrupted, however the door cannot be opened for safety reasons (water level, temperature

or speed too high).

i

The program continues.

The indicator light is lit (red).

You can add or reduce laundry as long as theStart/Pause indicator light flashes (red).

i

It is not recommended to add laundry after the washing phase is complete.

i

300/DLX/500 Series	Each press of the Delay start button	Add	a	garment /
	increases the delay start time by one	Interrupting the			program
	hour.
	q If necessary, change theStart	You can put laundry in the drum after
	time. Press theDelay Start button	washing begins, take laundry out of the
	until the desiredStart time is	drum	early	or interrupt	the program at
	displayed.	any time.

500 Plus Series		q	Press	theStart/Pause		button.
			The Start/Pause		indicator light
			flashes.
q	Press theStart/Pause button.	q	Open	the door.
		q	Place/remove the		laundry.
	The indicator light is lit (red).
			Close	the door.
	Display shows the run time of theq
	selected program. The program	q	Press	theStart/Pause		button.

starts.

q

i

If necessary, press the button(s) for additional option(s).

The indicator light of the selected button is lit (red).

If an incorrect combination was
inadvertently selected,			the
indicator	light of	the	selected	i
button is	turned	off.

Each program step is indicated by the indicator lights under the display.

qIf necessary, change the spin speed with theSpin selection button until the the desired spin speed indicator light is lit.

During Washing

i Due to the highly engineered

suspension of this appliance, it may experience a shudder or shake when progressing from lower to higher spin speeds. q This behavior is normal due to q shifting of the drum system and should not cause concern.

Changing a program

qTurn the program selectorOffto.

qTurn the program selector to a newly selected program.

The Start/Pause indicator light flashes.

qIf required, change the settings;

see from Page 19.

qPress theStart/Pause button. The program starts.

The indicator light is lit.

iFor Spin, select the desired spin speed (but not final spin).

q	Press	theStart/Pause button.
q	Wait until this program ends.
q	Open	the	door.
q	Unload	the	laundry.

iIf a program is interrupted at a hig temperature, the door may remain locked until the appliance has cooled down.

iIf the program is terminated by switching off the appliance, the door may remain locked.

21