Windsor 30 SP manual Faults without display on the console, Fault Remedy

	Faults without display on the console
Fault	Remedy
Appliance cannot be started	Insert battery plug.
	Set main switch to “1”.
	Check fuse F1, replace if required. *
	Check battery; charge it if required.
Insufficient water quantity	Check fresh water level, refill tank if necessary.
	Check hoses for blockages; clean if required.
	Clean the fresh water filter.
Insufficient vacuum perfor-	Clean the seals between dirty water reservoir and cover and check for tightness, replace if required.
mance
	Clean the flat-fold filters at the suction support of the suction turbine.
	Clean the squeegee blades on the squeegee tool, replace if required
	Check suction hose for blockages; clean if required.
	Check the suction hose for tightness; replace if required.
	Check if the cover on the dirty water discharge hose is closed
	Check the setting of the squeegee tool.
Insufficient cleaning result	Set/ adjust contact pressure.
	Check the brushes for wear, replace if required.
Brushes do not turn	Reduce contact pressure.
	Check if foreign matters block the brushes; remove foreign matter if required.
Optional overall lamp and/or	Check fuse F4, replace if required. *
working lamp is not functioning
* The fuses are located in the flat insertion sockets on the wiring plate and can be accessed by opening the front panel.

14English