3M DL, SE user manual Selecting measurements with Lookup softkey

x

Table of Contents

Figure 4-2:	Setting Date parameters for Auto-Run #1	39
Figure 4-3:	Example of setting up Auto-Run(QSP-II)	40
Figure 4-4:	Day of the Week (DOW) setup	41
Figure 4-5:	Auto-Run Shutdown screen	42
Figure 4-6:	Timed Run setup screen	43
Figure 4-7:	Level-Triggered screen	44
Figure 4-8:	Secure/Lock option	47
Figure 4-9:	Secure/Lock screen	47
Figure 4-10:	Adding code for secure/lock screen	48
Figure 4-11:	Secure/lock run prompt	48
Figure 4-12:	Secure/lock setup prompt	49
Figure 4-13:	Digital-Out screen	50
Figure 4-14:	QSP/Serial	52
Figure 4-15:	Mass Storage	52
Figure 4-16:	Log to Port	53
Figure 4-17:	Comm-Set screen for GPS data	54
Figure 4-18:	Viewing GPS coordinates in COMM-Set screen	55
Figure 5-1:	Bar chart screen (A) and Filtered Bar Chart (B)	60
Figure 5-2:	Attaching calibrator to SoundPro	62
Figure 5-3:	Setting pre-cal screen	63
Figure 5-4:	Calibration history screen	63
Figure 5-5:	Post-Calibrate history screen	64
Figure 5-6:	Bar Chart screen in run mode	64
Figure 5-7:	Selecting measurements with Lookup softkey	66
Figure 5-8:	Example measurement icons & descriptors	67
Figure 5-9:	Bar Chart screen and Filtered Bar Chart screen	68
Figure 5-10:	Community Noise screen	69
Figure 5-11:	Dosimetry screen	70
Figure 5-12:	Tabulation screen for octave filtering	71
Figure 5-13:	Back-erasing	72
Figure 5-14:	Time Log screen	74
Figure 5-15:	Stopping and pausing	75
Figure 6-1:	Reverb Time	78
Figure 6-2:	Interrupted noise example	79
Figure 6-3:	Reverb Time Setup screen	81
Figure 6-4:	Reverb Time Setup screen	83
Figure 6-5:	RT60 bar chart screen	84
Figure 6-6:	Decay curve screen	85
Figure 6-7:	Tabular octave filtering RT screen	86
Figure 6-8:	Selecting measurement type for curves	88
Figure 6-9:	Captured Curves and Survey mode	89
Figure 6-10:	Selecting 1/1 or 1/3 for measurement type	90
Figure 6-11:	Capturing a curve (CAP-1)	91
Figure 6-12:	Selecting measurement type for curves	92
Figure 6-13:	Curves setup screen example	93
Figure 6-14:	1/1 or 1/3 octave measurement type for audiometric testing	94
Figure 6-15:	Selecting measurement type for curves	95
Figure 6-16:	Audiometric booth setup in the curves screen	95
		Models SE and DL