26

Basic setups

Measurement type (SLM, 1/1, 1/3, STI-PA, RT60)

NOTE: To move to between the time, day, day fields, press Enter repeatedly until one of these fields are highlighted and then press Up/Down arrow to move between the fields.

5.If you’re finished working in the Time-Date screen, press On/Off/Esc once to return to the Setup screen and twice to return to the Start screen.

Measurement type (SLM, 1/1, 1/3, STI-PA, RT60)

The measurement type is easily selectable at the start screen via a softkey button. This is assessable at all times unless you are running a study. To change or set the measurement type, ensure the SoundPro is stopped as indicated by the stop icon. Depending on the options you ordered with your SoundPro it may or may not have all the measurement types indicated above. NOTE: For STI-PA and RT60, please see Chapter 6, “Additional Options”.

Setting Measurement type

1.Turn on the SoundPro SE/DL by pressing On/Off/Esc .

If turned on and you are not at the start screen, press On/Off/Esc repeatedly until the start screen appears (see Figure 3-3).

2.At the start screen, select the first softkey button repeatedly until the appropriate measurement type is selected.

You may have the following selectable options: Sound level meter (SLM), 1/1 octave, 1/3 octave, and/or STI-PA (Speech Transmission Index).

Softkey menu

Measurement type (Sound Level Meter)

1st softkey

Repeatedly press to move (toggle) through measurement types

Figure 3-3: Measurement type and start screen

Models SE and DL

Page 39
Image 39
3M DL, SE user manual Measurement type SLM, 1/1, 1/3, STI-PA, RT60,  Setting Measurement type, 1st softkey