3M DL, SE user manual Auto-Run, Setting up auto-run, Date setting

38

Auto-Run

Date setting

Auto-Run

SoundPro SE/DL has four automatic run modes which include: Date auto- start with duration, Day of the Week auto-start with duration, Timed Run (duration only setting), and Level Triggered Runs (or Level auto-start runs).

Setting up auto-run

All Auto-Run setups begin in the Auto-Run screen. The Auto-Run screen shows the current status of the Auto-Run feature. The following features are available: Disabled, Timed Run, DOW (day of week), Date, and Level- Triggered settings.

Date setting

A Date mode run wakes up the instrument from a powered down condition, runs the study, saves it, then powers down again and is only executable once. The parameters are selectable by specified dates and times with up to four programmable individual setups.

A plus sign preceding a number (i.e., +1) indicates if one of the four settings is enabled (or activated) where as a negative sign (i.e. -4) represents a disabled (or deactivated) setting.

Setting up or changing auto-run with date parameter

1. From the start screen, press Up/Down		to highlight Setup and press
Enter	.

2.Select Auto-Runby using Up/Downto highlight and press Enter to select.

3.In the Auto-Run screen, repeatedly press Enter until Date appears.

Date setting

View/Set Parameters – when

selected a new menu appears

Figure 4-1: Auto-Run with Date selected

4.To select View/Set Parameters, press the Down arrow to highlight and press Enter .

Models SE and DL